Tag Archives: makers

VINTAGE-old-antique-EARLY-STANLEY-No-97-CABINET-MAKERS-CHISEL-PLANE-01-pmuj

VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE

VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE
VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE
VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE
VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE
VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE
VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE
VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE
VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE
VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE
VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE
VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE

VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE
A special purpose edge or chisel plane from Stanley USA. Aimed at piano makers and cabinet makers for working into the corners and tight spaces where the use of other planes would be impractical or impossible. The Stanley 97 plane was offered from 1905 1944, is 10 inches long and has a 2.1/4 inch adjustable cutter. Fitted with a rosewood rear knob, fixed as in the bench planes with a threaded bar and nut however the nut on the No. 97 is nickle plated rather than plain brass. Cast iron & rosewood knob. For planing right up into a corner, similar to a chisel The Stanley cabinet makers edge plane number 97 is also known as the’Stanley piano makers plane’. The 97 plane was made from cast iron with a front knob made from Rosewood, a black lever cap and a depth adjuster mechanism. The upper surface of the plane was finished with a black japanning. The plane has a distinctive shape and design with the walls of either side slanting down to the surface. At the centre of the wall on each side there is a semi-circle removed. There is an open mouth at the front which in effect makes this plane like a large chisel; this plane is therefore sometimes referred to as a chisel plane. At the time of production in the early 1900’s, this plane was advertised saying there is no other plane which can work into small spaces or so close to corners. The Stanley 97 plane blade rests on a solid bed for nearly the entirety of the blade. The 97 has a blade fine adjustment mechanism to allow the user to simply and easily make small adjustments to the depth of cut. The blade can be adjusted by using the blade fine adjustment wheel, to use this the first thing to do is loosen the lever cap slightly (turn the lever cap screw anti-clockwise) so the blade is not locked firmly in place. Next locate the depth adjuster knurled wheel which can be found under the top-end of the blade. Turn the depth adjuster clockwise to move the blade forward for a deeper cut or turn the adjuster anti-clockwise to move the blade backwards for a finer cut. Once the blade is in the desired position, secure the blade by tightening the lever screw (turn the lever cap screw clockwise) ensuring not to knock the blade. Sometimes the front corners of this plane are very slightly rounded off in a similar way that the corners of side rebate plane blade are. It has a chip to the corner. Ool – tools – carpenter – carpentry – cabinet maker – woodworking – plane – router – stanley – norris – mathieson – preston – spiers – tyzack – i sorby – marples – record – woden – chisel – saw – disston – collectable – collector? S – unique – Goodell-Pratt – Goodell Pratt – Moulding – karl holtey – lie nielsen – veritas. The item “VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE” is in sale since Tuesday, October 22, 2019. This item is in the category “Collectables\Tools & Collectable Hardware\Collectable Tools\Carpentry & Woodworking Tools\Planes”. The seller is “vintage_tools_deluxe” and is located in Croydon. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay.
  • Collectable/ Vintage: Collectable/ Vintage
  • Sub-Type: Planer
  • Type: Chisels
  • Manufacturer: Stanley
  • Featured Refinements: Vintage Plane
  • Modified Item: No

VINTAGE old antique EARLY STANLEY No 97 CABINET MAKERS CHISEL PLANE
Vintage-Antique-Small-14-Lb-6-oz-Blacksmith-Knife-Makers-Anvil-WithHorn-9-Long-01-rbl

Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long

Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long
Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long
Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long
Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long
Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long
Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long
Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long
Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long
Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long
Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long
Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long
Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long

Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long
Vintage/Antique Small 14 Lb 6.4 oz. Blacksmith/Knife Makers Anvil W/Horn, 9 Long. 14+ pound small size anvil. No cracks or breaks. The anvils top has typical dents, scrapes & scratches that would be found on a antique anvil (see pics). Anvil is a little over 9 long. It’s about 3 wide. It’s a little over 4-1/2 tall. Very nice hard to find small anvil. PICTURES TELL THE STORY.. A MUST FOR YOUR COLLECTION.. The item “Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long” is in sale since Sunday, August 30, 2020. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Blacksmithing”. The seller is “uglasayers” and is located in Livonia, New York. This item can be shipped to United States.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Brand: Unbranded / No Makers Mark Visible
  • Featured Refinements: Small Anvil

Vintage/Antique Small 14 Lb 6 oz. Blacksmith/Knife Makers Anvil WithHorn, 9 Long
Vintage-Emmert-Turtleback-Pattern-Makers-Blacksmith-Antique-Vise-01-mdv

Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise

Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise
Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise
Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise
Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise
Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise
Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise
Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise
Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise
Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise
Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise
Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise
Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise

Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise
Vintage complete Emmerts Turtleback Pattern Makers Vice & Stand in great condition. The only flaw is a small corner of cover plate is broken just cosmetic which is an easy fix. Which absolutely no effect in usage Forward screw housing works as it should , collar is fine.. This belonged to my grandfather who was proficient in woodworking.. Will update with exact weight.. The item “Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise” is in sale since Tuesday, November 20, 2018. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Carpentry, Woodworking\Vises, Clamps”. The seller is “blingiton2″ and is located in West Mifflin, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.
  • Brand: Emmert’s
  • antique Emmert’s: Antique Vise
  • Country/Region of Manufacture: United States
  • Original/Reproduction: Antique Original

Vintage Emmert Turtleback Pattern Makers Blacksmith Antique Vise

Beautiful Antique Vulcan 100 Lbs Blacksmith Anvil Knife Makers

Beautiful Antique Vulcan 100 Lbs Blacksmith Anvil Knife Makers
Beautiful Antique Vulcan 100 Lbs Blacksmith Anvil Knife Makers
Beautiful Antique Vulcan 100 Lbs Blacksmith Anvil Knife Makers
Beautiful Antique Vulcan 100 Lbs Blacksmith Anvil Knife Makers
Beautiful Antique Vulcan 100 Lbs Blacksmith Anvil Knife Makers
Beautiful Antique Vulcan 100 Lbs Blacksmith Anvil Knife Makers
Beautiful Antique Vulcan 100 Lbs Blacksmith Anvil Knife Makers

Beautiful Antique Vulcan 100 Lbs Blacksmith Anvil Knife Makers
Lots of character but good working surfaces. Base is 9×9 Overall length is 20 Height is 9 1/2 Flat working surface is 3 1/2 x 12 1/2 Point sticks out from flat surface 7 1/2 Weight is 100lbs. The item “BEAUTIFUL ANTIQUE VULCAN 100 LBS BLACKSMITH ANVIL KNIFE MAKERS” is in sale since Wednesday, February 21, 2018. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Blacksmithing”. The seller is “dickhome123″ and is located in Pigeon, Michigan. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • Brand: Vulcan

Beautiful Antique Vulcan 100 Lbs Blacksmith Anvil Knife Makers

Incoming search terms:

  • antique vulcan anvil #2